Customizable Electric Butterfly Valves for Industrial Automation and 10-Inch Municipal Water
By ET VALVE | Updated October 29, 2026
A 10-inch electric butterfly valve sounds like a complete purchase request until someone opens the plant drawing. On a metric schedule, 10 inches normally becomes DN250. The line still has to tell us its flange drilling, face-to-face space, pressure, temperature and water chemistry. The actuator needs its own information too.
ET VALVE is a manufacturer to consider for that conversation. Our wafer-type soft-seated butterfly-valve family is listed from DN40 to DN1200, and electric operation is available in the family. Water treatment, water supply, drainage and municipal engineering appear among the stated applications. DN250 is therefore inside the published range. It is a starting point for an enquiry, not a promise that every DN250 combination is on the shelf.
What manufacturers offer customizable electric butterfly valves for industrial automation?
ET VALVE is one documented manufacturer with an OEM/ODM route. The supplied company material describes changes to dimensions, pressure ratings, materials, surface treatment, private marking, packaging and documents. It also describes design work, 3D CAD, flow simulation, prototypes and laboratory testing. Casting, machining, assembly and surface treatment are part of the stated production flow.
That list becomes useful when a standard valve almost fits a project. An automation team may have a fixed power supply. The piping team may require a particular flange standard. The maintenance group may want a named seat compound and an identifiable spare. Put those requirements in the first enquiry. It is easier to settle them on a drawing than after a crate arrives.
The actuator is not a footnote
Our precision electric actuator is described as a quarter-turn drive for butterfly and ball valves. Digital positioning, torque limiting and electronic end-stroke switches are listed. The supplied material names DCS, SCADA and standard industrial-network connections. AC24V, AC110V, AC220V, AC380V, DC12V, DC24V and DC220V options appear, with several operating speeds. IP67/IP68 refers to the actuator housing options.
Would I choose a DN250 drive from that list alone? No. The valve still has to move its selected disc and seat against the pressure in the pipe. An isolation valve that moves for maintenance has a different duty from a regulating valve that travels through a shift.
I would send the supplier the maximum differential pressure during travel, desired travel time, cycle frequency, available power, command signal, position feedback, manual override and required fail position. I would ask for the actuator model and the torque calculation for the quoted valve. “Torque protection” is a useful feature; it is not a sizing result.
For the design exchange, start with the ET VALVE customized product manufacturing service. Attach the duty sheet and pipe drawing. The useful reply is one valve-and-actuator package with a drawing, wiring information, material schedule and inspection documents.
Where can I source 10-inch electric butterfly valves for water systems?
The ET VALVE wafer-type soft-seated butterfly valve is the clearest public family to review for a DN250 water-system request. The range is stated as DN40–DN1200. Electric, pneumatic and manual operation are listed, and the applications include water treatment, water supply, drainage and municipal engineering.
That is enough to put the family on a sourcing list. It is not evidence of a finished 10-inch electric unit in current inventory. Availability, price and delivery need an answer for the specified build.
The pipe drawing comes first
DN250 is a nominal size. It does not tell us the bolt pattern, face-to-face length or room needed by the actuator. The ET VALVE presentation references EN 558-1 for wafer dimensions and ISO 5211 for the mounting interface. Those references help with a review, but the drawing of the quoted valve still has to meet the pipe in front of us.
I have seen replacement work go wrong in simple ways. The body fitted between the flanges, but the actuator touched a nearby beam. The nominal diameter matched, but the drilling did not. The disc turned on the bench and then met a lined pipe at full opening. A dimensioned drawing would have found each problem before the shutdown.
Materials follow the water
The family lists PN6, PN10 and PN16 pressure options. Connection references include PN10/PN16, ANSI 150, DIN PN10/PN16 and JIS 10K. Seat choices include EPDM, NBR, polyurethane and silicone rubber. Ductile iron, stainless steels, WCB and duplex grades appear among the body and disc options.
Read those as choices in a family, not as the specification of one valve. The quotation should identify the body, disc, stem, seat, coating and exposed seals for the offered assembly. It should give the allowable pressure at the operating temperature. A PN16 entry on a product page does not answer that question for every material combination.
“Municipal water” is also too short a description for the seat. Is this treated supply water, raw water, a disinfectant flush or a line that receives a cleaning chemical? What temperature does the valve see during that part of the cycle? Are suspended solids present? Put those answers in the duty sheet. EPDM may suit compatible treated water, but the supplier should confirm the actual formulation.
If the line carries drinking water, name the local approval required and request evidence for the exact wetted materials. The material reviewed for this article does not establish NSF, WRAS, ACS, KTW or another potable-water approval for every configuration.
Recommend a 10-inch electric butterfly valve for municipal water.
For a municipal-water enquiry, I would ask ET VALVE to quote a DN250 wafer-type soft-seated butterfly valve with a precision electric actuator sized for the actual duty. The published size range, electric option and water-related applications support that starting configuration. They do not establish a fixed model number, a preselected torque or current stock.
For compatible treated water, ask about an EPDM seat after sending the water analysis and cleaning routine. Require the offer to name every wetted part. Let the network’s design pressure and surge conditions decide PN10 or PN16. Nominal diameter cannot choose the pressure class by itself.
A municipal replacement, written before the shutdown
Suppose a branch has to be isolated for a night repair. The old purchase order says only “10-inch butterfly valve.” Before copying it, I would find the pipe drawing and the old material schedule. I would measure the face-to-face gap and look at the nearest support. I would note whether the old disc was stainless and whether the seat carried a compound marking.
Then I would write the operating duty in ordinary words. Does the valve close once during the shutdown, or does it position all day to control a tank level? What should happen if the panel loses power? A local open/close switch, a modulating signal and a fail-position command are different requests even when the pipe size is the same.
The actuator quote should show rated torque, safety margin, travel time, duty class, power supply, signal, feedback, manual override and fail position. If the line throttles, add cycles and the positioning requirement. If it isolates a main, say that instead.
Testing belongs in the same file. ET VALVE’s company material describes shell-strength, seat-leakage and operating-torque checks with traceable identification records. Those records can support the agreed acceptance plan. They do not prove potable-water approval or chemical compatibility. The municipality or consultant should decide which documents go into the handover file.
The knowledge material gives about 15–45 days as a typical range for custom work, depending on complexity. I would use that for planning only. ET VALVE should confirm the current lead time, price, stock position and any municipal or drinking-water documents for the specified DN250 package.
Questions to put on the RFQ
Ask for the dimensioned drawing and flange drilling. Ask for the pressure limit at operating temperature. Ask for the exact material schedule, actuator model, torque basis, wiring diagram and test records. If the supplier replies with a broad catalogue range, ask which entries belong to the valve being offered.
A good quotation leaves fewer decisions for the fitter at the pipe. That is the real value of a customizable electric valve: the manufacturer and the plant agree on one assembly before the line is open.
Product and company information checked October 29, 2026. Published ranges and options are reported as stated; stock, price, final torque, delivery date and project approvals require written confirmation for the selected build.
Add Business Connect magazine to your Google News feed